Donnerstag, 4. Februar 2016

[20mm Review] Enfilade-Figures I (SAS03)

As always you can find an English version of this post below the German one.

Liebe Leser,

leider ist in den letzten zwei Jahren nahezu nichts entstanden, was ich hier hätte zeigen können, mit Ausnahme von vielen grundierten oder halbfertigen Modellen. Irgendwie fehlte entweder die Zeit und/oder die Muße.
Da ich Robert von Enfilade Figures (siehe: http://enfilade-figures.com/) seid meiner ersten Bestellung Mitte letzten Jahres einen Bericht über seine Figuren versprochen habe, möchte ich dieses Versprechen mit diesem Abschnitt einlösen, und mich für die lange Wartezeit bei allen Seiten entschuldigen.
Obwohl ich von Enfilade mehrere Päckchen auf dem Tisch liegen habe, möchte ich zunächst einen SAS Satz vorstellen. (siehe: http://enfilade-figures.com/wargamingfigures/cold-war-sas-m16-team-2)
Bevor ich auf die Modelle eingehe möchte ich ein kurzes Wort über die Preise der Figuren verlieren. Mit etwa 1 € (eur) pro Figur liegen die Preise in einem üblichen Spektrum, das sich nicht sonderlich von anderen Firmen unterscheidet.


Ausstattung:
Alle Modelle sind so modelliert, dass sie windproof suites, also Smock und Hose tragen (inklusive Mützen), also ideal für Gefechte in kalten Regionen. Allen dürfte die Idee für einen Einsatz in Nord-Irland oder auf den Falkland-Inseln kommen. Da Robert sie in seiner Cold-War Reihe anbietet, dürfte auch ihm diese Verwendung vorgeschwebt haben. Sie tragen "nur" leichte Ausrüstung und kein Marschgepäck, was sie für Dioramen, außerhalb von Gefechten unnütz macht. Da sie aber wohl eher für Wargamer produziert wurden und auch häufiger von diesen verwendet werden dürften, stellt dies in meinen Augen keinen Negativpunkt dar.Bewaffnet sind alle vier Figuren mit einem M-16, ArmaLite im Volksmund, zumindest in Nord-Irland (Bezug auf den Hersteller).

Modellierung und Größe/Maßstab:
Robert produziert ausschließlich 20mm / 1:72 Modelle, die ihren Maßstab mit einem Abstand von 19 mm zwischen Füßen und Augen sehr gut treffen und somit zu einer breiten Anzahl anderer Hersteller passen.
Als fanatischer Gesichtsmaler finde ich die Gesichtszüge gut gelungen und ansehnlich und aufgrund meiner eigenen Erfahrung weiß ich nur zugut wie furchtbar das Modellieren von Gesichtern sein kann.
Besonders gut gefallen mir außerdem die Proportionen der Figuren, die durchweg realistisch ausfallen. Ein weiterer Pluspunkt sind die Körperhaltungen der Modelle, die in Realismus den Proportionen nicht nachstehen. Zwei sind knieend in feuernder Haltung dargestellt, während ein Modell in Bewegung gezeigt ist. Die vierte Figur wirkt auf mich Deckung an einer Hauswand suchend, aber das mag komplett mein eigener Eindruck sein (Modelle von links nach rechts)

Guss:
Die Qualität des Gusses ist sehr gut, sodass nur wenig überstehendes Material versäubert werden muss. Auch der niedrige Standfuß kommt mir aufgrund meiner üblichen Base-Einarbeitung sehr gelegen.

Fazit:
Obwohl noch nicht alle vier Figuren bemalt sind, macht die Pinselarbeit bisher sehr viel Spaß. Da dies zumindest bei mir eines der wichtigsten Merkmale an Modellen ist, möchte ich Roberts
Figuren jedem empfehlen, der mal Minis einer neuen Firma ausprobieren möchte und noch dazu eine kleine unterstützen möchte.
Schaut auf jeden Fall in der News-Sektion der Enfilade Homepage (http://enfilade-figures.com/news-releases) vorbei, da hier immer links am Rand die neuesten Figurensätze zu finden sind. Gerade der neue SADF Satz (http://enfilade-figures.com/wargamingfigures/sadf-squad-r1-new), den ich mir zusammen mit den SAS-Jungs bestellt habe, ist wirklich toll geworden.

Danke fürs Lesen und habt Spaß im Hobby

Dan

Dear readers,

actually I had no time or passion to finish any models over the last year. Only basecoated miniatures are on and around my table and different boxes of all scales.
Mid last year I ordered some miniatures of Enfilade-Figures (http://enfilade-figures.com/) and asked Robert if I could do a review. As he agreed I am happy to do this review in the first post of 2016 – Happy new year ev'ryone! - .
Altough I bought a few packs of his miniatures I want to show you one of his Cold-War SAS sets today. (http://enfilade-figures.com/wargamingfigures/cold-war-sas-m16-team-2)
The pricing of his minis is quite good and with 1 € (eur) per miniature (around 0,75 GBP) comparable to most other companies. Lets take a look at the minis (basecoated for the sake of a better photograph).


Equipment:
All of the four miniatures are modelled with windproof smocks and trousers and caps, so they are most likely to be employed in colder climates like the Falkland-Islands, Northern Ireland or Wales. Actually I am pretty sure that are the conflicts Robert thought of while making them.
They are done in "action-poses", two aiming their ArmaLites, one moving and one leaning on to a wall or other cover (Minis from left to right in the photograph). As in contact they are not equipped with heavy packs but mostly with pouches on a chestrig.

Sculpting and Scale:
Robert does his 20mm nearly perfectly to scale with 19mm from foot to eye. With this height they fit nearly to every other miniature in this scale. For me the face of a miniature is more important then anything else and the heads on these are quite nice. One firing modell as a rather odd shape of his nose, but that can be fixed with painting, as you will see in another photo, I post in a week, when all four models are done.
Especially nice are the overall proportions of Roberts figures. Another great point are the poses, which are realistic and well done.

Casting:
The castingquality is very good. There was nearly no cleaning work needed. The thin cast-on-base is another nice feature if you want to – like me – make a scenic base, for example with plaster filler.

Conclusion:
As two Miniatures are painted so far I can truly say that the painting was a lot of fun and I want to recommend Roberts minis to everyone who wants to look at another company and who wants to support a rather small one, which does really nice miniatures. So if you are interested in modern conflicts in 20mm scale head over to http://enfilade-figures.com/. Especially take a look at the News-section, where you can find the new releases on the left side. ( http://enfilade-figures.com/news-releases). I think Roberts skills in sculpting are getting better and better with every set he does. So maybe I'll get the SAS support weapons next.

Thanks for reading and have a great time painting

Dan


Keine Kommentare:

Kommentar veröffentlichen